FF-P-110 Padlock, Changeable Combination \(Resistant To Opening By Manipulation And Surreptitious Attack\)This specification covers changeable combination padlocks designed to conform to the standards for security equipment as set forth in the "National Security Council Directive Governing the Classification, Downgrading, Declassification and Safeguarding of National Security Information". The padlocks are required to resist opening by manipulation and surreptitious techniques for the period of time specified. The padlocks are intended for use as indicated in 6.1. The padlocks are not tested for forced opening.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14

FF-P-110J

5. PACKAGING

5.1 Preservation, packing, and marking shall be level A or C (commercial) as specified (see 6.2).

5.1.1 Level A. As specified in contract.

5.1.2 Commercial. The padlocks shall be packaged in accordance with ASTM D3951 to afford

adequate protection against damage during shipment from the supplier to the initial destination.

5.2 Packing. Packing shall be level A or commercial as specified in contract (see 6.2).

5.2.1 Commercial. The padlocks shall be packed in accordance with ASTM D3951 to assure

carrier acceptance, and safe arrival at their destination.

5.3 Marking.

5.3.1 Civil agencies. In addition to markings required by the contract or order, the interior

packaging and shipping containers shall be marked in accordance with FED-STD-123.

5.3.2 Military agencies. In addition to markings required by the contract or order, the interior

packaging and shipping containers shall be marked in accordance with MIL-STD-129.

6. NOTES.

(This section contains information of a general or explanatory nature which is helpful, but is not

mandatory.)

6.1 Intended use. The padlocks under this specification are intended for use as determined for

low level resistance to forced entry and high level tell-tale manipulation or surreptitious action.

The padlocks are intended for use ashore and aboard ocean going vessels, indoors, or outdoors,

semi-protected by a structural overhang similar to eaves or a lean-to.

6.2 Acquisition requirements. Acquisition documents should specify the following:

Title, number, and date of this specification.

Type and class padlock required (see 1.2).

Number of bid samples required (see 3.1.1).

When a first article is required (see 3.1.2).

Bid sample delivery instructions (see 4.3.1.1).

Packaging level required (see 5.1 and 5.2).

6.2.1 Data requirements. When this specification is used in an acquisition and data are required

to be delivered, the data requirements shall be developed as specified by an approved Data Item

Description (DD Form 1664), and delivered in accordance with the approved Contract Data

Requirements List (DD Form 1423) incorporated into the contract. When the provisions of DoD

Federal Acquisition Regulations (FAR) Supplement, Part 27, Sub-Part 227.405-70 are invoked