A-A-1926A
Notes:
Ordering activities should specify:
1) Type (see ANSI/BHMA A156.4 paragraph 11.14).
2) Grade (see ANSI/BHMA A156.4 Appendix A, paragraph A8).
3) Size (see table A1 of ANSI/BHMA A156.4.).
4) Finish if suppliers standard finish is not acceptable (see ANSI/BHMA A156.4, Appendix A, paragraph A5).
5) Hand (right hand, left hand or reversible).
6) Options (see paragraphs 3.8, 3.12 and Appendix A paragraph A7 of ANSI/BHMA A156.4), (care should be taken that multiple options are compatible, verify with supplier).
7) Plunger access feature on tubular pneumatic closers if considered necessary (repairs may not be economically prudent, making this feature unwarranted).
8) Through bolts if standard wood screws or machine screws are not acceptable.
9) Template information if required.
The COMMERCIAL ITEM CERTIFICATION CLAUSE is not required when this commercial item description is used for procurement.
ANSI/BHMA standards and directions are available from the Builders Hardware Manufacturer’s Association, Inc, 60 East 42nd Street, New York, NY 10165 of the American National Standards Institute, Inc, 1430 Broadway, New York, NY 10018.
Copies of Military Standard 105 are available from the Naval Publications and Forms Center, 5801 Tabor Ave., Philadelphia, PA 19120.
ASTM standards are available from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
The standards referenced in this document shall be the issues in effect on the date of the invitation for bids or request for quotation and shall be used to determine compliance with these requirements. In the event that there is a conflict between this document and a standard referenced herein, this document shall take precedence.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business