A-A-1926A
Tests per ANSI/BHMA A156.4. Samples shall be selected in accordance with MIL-STD-105, special inspection level S-1, AQL of 2.5 expressed in percent defective. The sample closers shall be tested in accordance with ANSI/BHMA A156.4.
Certification. Listing in the current Builders Hardware Manufacturers Association, Inc, Directory of Certified Door Closers or other listing service which provides equivalent testing and follow-up service shall be considered proof of conformance with ANSI/BHMA A156.4 test requirements. Labeling, listing and following-up service procedures are specified in the BHMA directory. The Government may refuse to accept such listing as evidence of conformance if closers furnished are subsequently found not to conform with requirements.
Examination for preparation for delivery. A random sample of unit, intermediate and shipping containers (as applicable) shall be selected from each lot and examined for conformance with the preservation, packaging, packing, labeling and marking required in the contract or order. Samples shall be selected in accordance with MIL-STD-105, Inspection level II, AQL 6.5 expressed in terms of defects per hundred unit.
Preservation, packaging, packing, labeling, and marking (Civil Agencies). The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order.
Packaging (DOD). The packaging shall be in accordance with ASTM Standard D3951 Commercial Packaging, Practice for’.
Regulatory requirements. In accordance with section 23.403 of the Federal Acquisition Regulations, the Government’s policy is to acquire items composed of the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition without adversely affecting performance requirements of exposing supplier’s employees to undue hazards from the recovered materials. The term “recovered materials” means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw materials as opposed to virgin raw materials. None of the above shall be interpreted to mean that the use of used or rebuilt products are allowed under this commercial item description unless otherwise specified.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business