[INCH-POUND]
A-A-1384A
March 4, 1993
TO SUPERSEDE
A-A-1384
September 10, 1980
COMMERCIAL ITEM DESCRIPTION
HOLDER, DOOR
The General Services Administration has authorized the use
of this
Commercial Item Description.
1. SCOPE
1.1 Scope. This commercial item description covers non-automatic type door holders.
1.2 Classification. The door holders shall be furnished in the following types and sizes:
Type I- Lever
Size 1- 2 inch (50.8 mm)
Size 2- 3 inch (76.2 mm)
Type II- Plunger
Size 1- 7/8 inch (22.2 mm)
Size 2- 1-1/8 inch (28.6 mm)
2. APPLICABLE DOCUMENTS
2.1 The documents referenced in this commercial item description shall be the issues in effect on the date of the invitation for bids or request for proposal unless otherwise specified. These documents form a part of this commercial item description to the extent specified. In the event of a conflict between this commercial item description and a document referenced herein, this commercial item description shall take precedence.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other data which may improve this documents should be sent to: General Services Administration, Engineering Group (7FXEE), 819 Taylor Street, Fort Worth, TX 76102. |
DISTRIBUTION STATEMENT A: Approved for public release;
Distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business