A-A-1193A
Sampling for quality conformance examination. A random hangers shall be selected from each lot in accordance with Military standard, MIL-STD-105’ SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES’, inspection level S-2, AQL 6.5 expressed in terms of percent defective. The sample unit shall be one hanger.
Visual and dimensional examination. The sample hangers shall be visually and dimensionally examined to verify compliance with this description. Tolerance limits specified are absolute limits as defined in ASTM Recommended Practice E29, for Indicating which places of Figures are to be considered significant in specified limiting values.
Testing. Testing shall be performed in accordance with Table I.
Examination for preparation for delivery. A random sample of unit, intermediate and shipping containers (as applicable) shall be selected from each lot and examined for conformance with the preservation, packaging, packing, labeling, and marking required in the contract or order. Samples shall be selected in accordance with MIL-STD-105, Inspection level S-2, AQL 6.5 expressed in terms of defects per hundred unit.
Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, and marking shall be as specified in the contract or order.
Regulatory requirements. In accordance with section 23.403 of the Federal Acquisition Regulations, the Government’s policy is to acquire items composed of the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition without adversely affecting performance requirements or exposing supplier’s employees to undue hazards from the recovered materials. The term “recovered materials” means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw materials as opposed to virgin raw materials. None of the above shall be interpreted to mean that the use of used or rebuilt products are allowed under this commercial item description unless otherwise specified.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business