A-A-1040B
3.4 The key chain shall be of corrosion resisting steel or brass and shall be not less than 21-3/4 inches in length.
3.5 The spring shall be of such length and tension as to reel in and support 8 tumbler type door keys or one drill chuck key firmly against the case, as applicable.
3.6 The end of the chain shall be provided with a swivel or other device to prevent the chain from twisting.
3.7 Type I reel cases shall have a metal loop of sufficient size to accommodate a 1-3/4 inch wide belt. Type II reel case shall have a metal clip for clipping and supporting the key chain reel on the user’s belt. Both the loop and clip shall be designed to provide a snug fit or slight grip on the user’s belt. reel cases shall have a metal mounting plate with two fastening the key chain reel on machinery.
3.8 Type III key chain reels shall be furnished with a self-ejecting safety key, Jacobs K3 size.
3.9 Key chain reel cases as well as clips, loops or mounting plates as applicable shall be provided with a smooth, even, corrosion-resistant finish.
3.10 Workmanship. The key chain reels shall function smoothly and durable construction. The key chain reels shall be free from defects such as sharp edges, loose plating, burrs, pits, rust, or any other defects which adversely affect appearance, function or serviceability.
4. REGULATORY REQUIREMENTS
4.1 Regulatory Requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4.2 Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business