MS35824E
Requirements:
1. Material - A. Aluminum-leaf-temper, H24 or H34 Alloy 5052 (UNS A95052) in accordance with
SAE-AMS-QQ-A-250/8.
Aluminum-pin-temper, H34 Alloy 5052, (UNS A95052) in accordance with
ASTM B211.
B. Brass-leaf-alloy 268 (UNS C26800) temper H02, in accordance with ASTM B36/B36M
Copper-pin-alloy 260 (UNS C26000) temper H02, in accordance with ASTM B134/B134M.
C. Corrosion resistant steel-leaf, temper annealed composition 301 (UNS S30100) in accordance with ASTM A666, 302 (UNS S30200) or 304 (UNS S30400) in accordance with ASTM A240/A240M.
Corrosion resistant steel-pin composition 302 (UNS S30200), 304 (UNS 30400),
305 (UNS S30500) and 316 (UNS S31600) in accordance with ASTM A313/A313M.
D. Carbon steel-leaf-cold-rolled, temper no. 4 in accordance with QQ-S-698.
Carbon steel-pin-composition 1010 (UNS G10100), 1020 (UNS G10200) in accordance with ASTM A853.
E. Carbon-steel-leaf-cold-rolled temper no. 4 in accordance with QQ-S-698.
Copper-pin-alloy 260 (UNS C26000) temper H02 in accordance with ASTM B134/B134M.
2. Finish - Material A, B,C and D shall be plain (uncoated). When specified, material D shall be zinc plated in accordance with ASTM B633, Type II, Fe/Zn 13 or cadmium plated in accordance with SAE-AMS-QQ-P-416,type II, Class 1. Material E shall be cadmium plated in accordance with SAE-AMS-QQ-P-416, Type II, Class 1.
3. Knuckles - End knuckles shall be a minimum of 1/2 of knuckle.
4. Pitch - Cumulative tolerance on pitch is ± .015 inches in any 36 inch segment.
5. Part number - The MS part number consists of the MS number plus the dash number followed by the applicable code for material from requirement 1.
Example: MS35824 - 4 B
Material code Dash number Basic MS number
When protective finish is required for material D, add F to the part number.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business