INCH-POUND
MS35824E
30 JUNE 2010
SUPERSEDING MS35824D
6 JANUARY 1989
DETAIL SPECIFICATION SHEET
HINGE, CONTINUOUS (PIANO) .050 THICKNESS, .187 DIA.
Inactive for new design after 22 January 1976.
This specification sheet is approved for use by all Departments and Agencies of the
Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and procurement specification MIL-H-9850.
STOCK LENGTH - 120 (SEE NOTE)
0G
275° MIN
A
B 0F
OPENING
.020 MAX
D
.050
P
IMPRESS PART NUMBER AT A MAXIMUM OF 3 INCH INTERVALS END LOOPS SHALL BE A MINIMUM OF 1/2
FIGURE I. Hinge.
TABLE I. Dash Numbers and Dimensions.
DASH NO. |
WIDTH |
STOCK LENGTH L ±.03 |
KNUCKLE LENGTH 1/ D |
PITCH 2/ P |
KNUCKLE 0F |
PIN 0G |
|
A REF |
B ±.031 |
||||||
1 |
1.062 |
.531 |
120 SEE NOTE 2 |
+.000 .998 -.015 |
+.015 2.000 -.003 |
+.007 .190 -.001 |
+.000 .187 -.002 |
2 |
1.500 |
.750 |
|||||
3 |
2.000 |
1.000 |
|||||
4 |
2.500 |
1.250 |
|||||
5 |
1.062 |
.531 |
+.000 1.998 -.015 |
+.015 4.000 -.003 |
|||
6 |
1.500 |
.750 |
|||||
7 |
2.000 |
1.000 |
|||||
8 |
2.500 |
1.250 |
|||||
1/ See requirement 3.
2/ See requirement 4.
AMSC N/A FSC 5340
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business