INCH-POUND
MS21122D
3 October 2005
SUPERSEDING MS21122C
31 May 1991
MILITARY SPECIFICATION SHEET
CLAMP, LOOP, CUSHIONED, WEDGE, POLYTETRAFLUOROETHYLENE
Inactive for new design after 3 October 2005.
This specification sheet is approved for use by all Departments and Agencies of the
Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-C-8603.
PART NUMBER TO BE LOCATED IN THIS AREA
JOGGLE TO PROVIDE B FLUSH SURFACE
Z REF
B
E
0D
X R 0.204 ±.005 HOLE THRU FOR W = .375
G (SEE NOTE 5.)
R .375
W
SEE ENLARGED
VIEW A T
RED STRIPE LENGTHWISE ALONG EITHER EDGE
STIFFENING
BEAD EXTENDED
MIN. RAD = B
B
(OPTIONAL)
.045 MAX
.025 MIN (FOR SIZES -4 AND ABOVE.)
.020 MIN (FOR SIZES -3 AND ABOVE.)
R WEDGE CONFIGURATION ACCEPTABLE DESIGN
S S (TYP)
REINFORCED CORNER
(OPTIONAL FOR SIZES -3 AND BELOW)
SECTION B-B
ACCEPTABLE DESIGN
VIEW A ENLARGED
FIGURE 1. CLAMP LOOP
AMSC N/A 1 of 5 FSC 5340
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business