INCH POUND
MIL-DTL-29181C
10 March 1998
SUPERSEDING
MIL-H-29181B
10 May 1994
DETAIL SPECIFICATION
HASP, HIGH SECURITY, SHROUDED,
FOR HIGH AND MEDIUM SECURITY PADLOCK
This specification is approved for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers hasps for high and medium security padlocks.
1.2 Classification. The hasps shall be of the following styles as specified (see 6.2 and 6.5):
Style 1 - Hasp (M29181-01), high security, hinged or sliding, horizontal door right hand.
Style 2 - Hasp (M29181-02), high security, hinged or sliding, horizontal door left hand.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government drawings. The following other Government drawings form a part of this
document to the extent specified herein. Unless otherwise specified, the issues are those cited in
the solicitation.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data
which may improve this document should be sent to: Commanding Officer (Code 15E2), Naval
Construction Battalion Center, 1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 5340
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business