MIL-DTL-24625A(SH)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
-
Underwater Cable Assembly and Encapsulated Components, Fabrication,
NAVSEA S9320-
Repair, and Installation Manual; Vol. II, Molding and Inspection
AM-PRO-020
Procedures for Fabricating Connector Plugs for Submarine Outboard
Cables
(Copies of this document are available from Naval Systems Data Support Activity (NSDSA) Commander, Code
5E30DP Bldg 1388, NAVSURFWARCENDIV NSDSA, 4363 Missile Way, Port Hueneme CA 93043-4307 or
online at https://mercury.tdmis.navy.mil.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM B487
-
Standard Test Method for Measurement of Metal and Oxide Coating
Thickness by Microscopical Examination of a Cross Section (DoD
adopted)
ASTM B489
-
Standard Practice for Bend Test for Ductility of Electrodeposited and
Autocatalytically Deposited Metal Coatings on Metals
ASTM B567
-
Standard Test Method for Measurement of Coating Thickness by the
Beta Backscatter Method (DoD adopted)
ASTM B568
-
Standard Test Method for Measurement of Coating Thickness by X-Ray
Spectrometry (DoD adopted)
ASTM B571
-
Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
(DoD adopted)
ASTM B602
-
Standard Test Method for Attribute Sampling of Metallic and Inorganic
Coatings
ASTM B748
-
Standard Test Method for Measurement of Thickness of Metallic
Coatings by Measurement of Cross Section with a Scanning Electron
Microscope
ASTM D543
-
Standard Practices for Evaluating the Resistance of Plastics to Chemical
Reagents (DoD adopted)
ASTM E8
-
Standard Test Methods for Tension Testing of Metallic Materials (DoD
adopted)
ASTM E290
-
Standard Test Methods for Bend Testing of Material for Ductility (DoD
adopted)
ASTM E1003
-
Standard Test Method for Hydrostatic Leak Testing
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at https://www.astm.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business