INCH-POUND
MIL-DTL-24625A(SH)
02 April 2009
SUPERSEDING
MIL-A-24625(SH)
14 November 1983
DETAIL SPECIFICATION
ANODES, IMPRESSED CURRENT CATHODIC PROTECTION - PLATINIZED TYPE
MIL-A-24625, dated 14 November 1983, is hereby reactivated and may be used for either new or existing design
acquisition.
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is
available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers platinized anodes for impressed current cathodic protection applications.
1.2 Classification. Platinized anodes are of the following types, grades, classes, and applications as specified
(see 6.2).
1.2.1 Types.
a.
Type I - Standard anode
b.
Type II - Diver replaceable anode
1.2.2 Grades.
a.
Grade A - Wire anode
b.
Grade B - Plate anode
c.
Grade C - Rod anode
1.2.3 Classes.
a.
Class 1 - Surface ship
b.
Class 2 - Submarine
1.2.4 Applications.
a.
Application A - Non-pressure underwater hull
b.
Application B - Pressure hull
c.
Application C - Tank
d.
Application D - Propulsor
Comments, suggestions, or questions on this document should be addressed to: Commander, Naval Sea Systems
Command, ATTN: SEA 05M2, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160
or emailed to CommandStandards@navy.mil, with the subject line "Document Comment". Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5340
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business