A-A-55620C
Example: AA55620 3S
Dash number
Basic number
6.4 Cross reference data. Loops, slide conforming to the CID are interchangeable/substitutable with loops,
slide conforming to MS51940C dated 14 June 1971.
TABLE II. CROSS - REFERENCE TABLE
Cancelled
Replacement
MS PIN
CID PIN
MS51940-3S
AA55620-3S
MS51940-4S
AA55620-4S
MS51940-5S
AA55620-5S
MS51940-7S
AA55620-7S
MS51940-9S
AA55620-9S
6.5 Source of documents.
6.5.1 FAR. The FAR may be obtained from the Regulatory Secretariat, 1800 F Street NW, Washington DC
20405 or online at https://www.acqnet.gov.
6.5.2 ASTM Standards. Copied of ASTM standards may be obtained from the ASTM International, 100
Barr Harbor Drive, West Conshohocken, PA 19428-2959 or online at https://www.astm.org.
6.5.3 MPI Manuals. Copies of MPI manuals may be obtained from the Master Painters Institute, 2800
Ingleton Ave., Burnaby, BC V5C 6G7 Canada or online at https://www.specifypaint.com.
6.6 Ordering data. The contract or order shall specify the following:
a. CID document number, revision, and CID PIN.
b. Product conformance provisions.
c. Packaging requirements.
6.7 Key words.
Zinc plate
6.8 Changes from previous issue. The margins of this specification are marked with vertical lines to
indicate where changes (additions, modifications, corrections, deletions) from the previous issue were
made. This was done as a convenience only, and the government assumes no liability whatsoever for any
inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this
document based on the entire content irrespective of the marginal notations and relationship to the last
previous issue.
3