A-A-55594B
3. REGULATORY REQUIREMENTS.
3.1 The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable, in
accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. PRODUCT CONFORMANCE PROVISIONS.
4.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item
description, conform to the producer's own drawings, specifications, standards, and the quality assurance practices,
and be the same product offered for sale in the commercial market. The government reserves the right to require
proof of such conformance.
5. PACKAGING.
5.1 Preservation, packing and marking shall be as specified in the contract or order.
6. NOTES.
6.1 Unless otherwise specified, all dimensions are in inches.
6.2 Unless otherwise specified in the contract or purchase order, packaging shall be in accordance with ASTM
D3951.
6.3 Pin without butt leaves will be supplied when the part identification number specifies dash 10 or dash 21.
6.4 The following part or identification numbering procedure is for government purposes and does not constitute a
requirement for the contractors. The part number identification number (PIN) shall consist of the basic commercial
item description number followed by a dash number from Table I, and material code. When protective finish is
required for material A or D, add "F" to the PIN.
Example: AA55594 -12 B
Material code
Dash number
Basic number
6.5 Source of documents.
6.5.1 Department of Defense Specifications. Copies of Department of Defense specifications may be obtained from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or
online at https://assist.daps.dla.mil/quicksearch/.
6.5.2 FAR. The FAR may be obtained from the Regulatory Secretariat, 1800 F Street NW, Washington DC 20405
or online at https://www.acqnet.gov.
6.5.3 ASTM Standards. Copies of ASTM standards may be obtained from the ASTM International, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959 or online at https://www.astm.org.
6.5.4 SAE Specifications. Copies of SAE specifications may be obtained from the Society of Automotive
Engineers, Inc., 400 commonwealth Drive, Warrendale, PA 15096-0001 or online at https://www.sae.org.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business