A-A-52420A
2. Workmanship. Plugs shall be free of dirt, oil, or other foreign material, except as required for preservation (see 5.). Workmanship shall be of a quality which shall assure a product free of burrs, rust, loose scale, splits, cracks, or other defects which affect serviceability. Plugs shall have a clean, sharp edge on the concave side.
3. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. PRODUCT CONFORMANCE PROVISIONS.
4.1 Responsibility for inspection. The contractor is responsible for all inspections (examinations and tests) to assure the plug meets all salient characteristics specified herein.
4.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. Items with known defects shall not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
5. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 6.2).
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Addresses for obtaining copies of referenced documents.
6.1.1 Non-Government publications. Copies of ASTM E18 “Standard Test Methods for Rockwell Hardness of Metallic Materials” and of IEEE/ASTM SI10 “American National Standard for Metric Practice” are available from www.astm.org or ASTM International, P.O. Box C700, West Conshohocken, PA 19428-2959.
6.2 Ordering data. Acquisition documents should specify the following:
a. Title, number, and date of this CID.
b. If required, the specific issue of individual documents referenced (see 6.1.1).
c. Plug PIN (see 6.3 and figure 1).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business