A-A-224C
(3) Tests specified in the industry standards referenced herein have been performance by a test facility acceptable to the Government.
(4) The product being offered is the same type, grade and material, and has been manufactured using the same material, processes and manufacturing techniques as the product tested.
In the event that conditions 2 thru 4 specified above or not met, testing shall be performed to establish conformance. If the contractor’s source for product varies or if the product is of foreign manufacture, then testing must be performed on each inspection lot. Finish testing shall be performed on a lot by lot basis regardless of source of manufacture or above conditions.
4.8 Examination for preparation for delivery. A random sample of unit, intermediate and shipping containers (as applicable) shall be selected from each lot and examined for conformance with the preservation, packaging, packing, labeling, and marking required in the contract or order. Samples shall be selected in accordance with Inspection level S-2, AQL 6.5 expressed in terms of defects per hundred units. The sample unit shall be one shipping container.
5. PREPARATION FOR DELIVERY
5.1 Packaging, packing and marking. The packaging, packing, and marking shall be as specified in the contract or order.
6. NOTES
6.1 Ordering data. Purchasers should select the preferred options permitted herein and include the following information in procurement documents (if applicable).
a. Title, number and date of this commercial item description.
b. Type, grade, size and finish.
c. The packaging, packing, and marking desired.
6.2 Part Numbering. Hinges conforming with this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the specification number, type, grade and size. An example of the part number configuration is shown below. This part numbering system is intended for identification and cross-indexing of the item within the Federal cataloging system. Part numbers are not required to be placed on the product or container.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business