A-A-1710A
4.2 Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable.
5. QUALITY ASSURANCE PROVISIONS
5.1 Product Conformance. The products provided shall meet the salient characteristics of this description, conform to the producer’s own drawings, specifications, standards and quality assurance practice and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
6. PACKAGING
6.1 Packaging. The preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES
7.1 Part Identification Number (PIN). Magnetic strip rolls conforming to this commercial item description shall be identified by part number configuration consisting of identification from a portion of the CID number and size. An example of the part number configuration is shown below. This part numbering system is intended for identification, and cross-indexing of the item within the numbering procedure is for government purposes and does not constitute a requirement for the contractor.
A17181
1- Size depicted in inches
A17181- Basic CID number
PART NUMBER |
SIZE |
NSN |
A17181 |
1 |
5340-00-761-7471 |
A17182 |
2 |
5340-00-914-5107 |
A17183 |
3 |
5340-00-914-5109 |
A17184 |
4 |
5340-00-914-5110 |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business