A-A-1718A
3.1.1 Adhesion: The magnetic strip shall have a pressure-sensitive adhesive on one side of the strip/tape. The adhesive side shall have a removable protective cover.
3.1.2 Performance Criteria: The following pre-conditioning criteria should be established prior to any performance testing of the magnetic strip:
The contact surface area shall be clean and smooth. The strip shall be applied and adhere to vertical plane surface.
3.1.2.1 Glass/Plexiglas surfaces. The adhesive back surface of the strip shall be capable of maintaining a load of 8-oz (236.58ml) per square inch, for a minimum of two (2) minutes, without any measurable downward vertical movement of the strip when tested on glass or Plexiglas surfaces.
3.1.2.2 Metallic surfaces. The magnetic surface of the strip shall be capable of maintaining a load 5-oz (147.86ml) per square inch, for a minimum of two (2) minutes, without any measurable downward vertical movement of the strip when tested on metallic surfaces.
3.2 Finish. The magnetic strips shall be clean, rigid, and free from cracks, sharp fins or edges. Finish shall be free from lumps, blisters, grit, uncoated areas, flaking and foreign material. There shall be no defects that affect appearance, function or serviceability.
4. REGULATORY REQUIREMENTS
4.1 Regulatory Requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403of the Federal Acquisition Regulation (FAR).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business