A-A-1194A
shall have a smooth surface and even color with no flaking or chipping.
3.5 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
3.6 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this commercial item description are met.
3.7 Commercial item. The use of the term “commercial item description” in this document does not imply that any item or items offered are not required to conform with all requirements specified herein.
3.8 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The metric values stated in parentheses are for information purpose only.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
4.2 Sampling. The sample size levels of inspection shall be in accordance with MIL-STD-105.
4.3 Lot information. All glides of the same finish and size from the same manufacturer offered for delivery at one time shall be considered a lot for purposes of inspection.
4.4 Sampling for visual and dimensional examination. A random sample of glides shall be selected from each lot in accordance with inspection level S-3, AQL 2.5 expressed in terms of percent defective. The sample unit shall be one glide.
4.5 Visual and dimensional examination. The sample glides shall be visually and dimensionally examined to verify compliance with
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business