MS35813E
TABLE I. Part Numbers and Dimensions.
PART NUMBER |
NOMINAL DIAMETER 0A |
LENGTH E |
THICKNESS OF BOSS +.00 -.01 H |
DIAMETER OF BOSS ±.03 0L |
DIAMETER OF HOLE 0M |
WEIGTH (APPROX) LBS |
ULTIMATE (MIN) AXIAL LOAD LBS |
|
SIZE |
TOLERANCE +.0010 |
|||||||
MS35813-1 |
.190 (#10) |
1.25 |
.19 |
.38 |
.1875 |
-.0010 |
.02 |
1500 |
MS35813-2 |
.250 (1/4) |
1.25 |
.28 |
.50 |
.2500 |
-.0010 |
.03 |
2700 |
MS35813-3 |
.312 (5/16) |
1.38 |
.34 |
.59 |
.3125 |
-.0010 |
.05 |
4200 |
MS35813-4 |
.375 (3/8) |
1.50 |
.44 |
.69 |
.3750 |
-.0010 |
.08 |
6000 |
MS35813-5 |
.437 (7/16) |
1.50 |
.50 |
.81 |
.4375 |
-.0010 |
.12 |
8200 |
MS35813-6 |
.500 (1/2) |
1.75 |
.56 |
.94 |
.5000 |
-.0020 |
.18 |
10700 |
MS35813-7 |
.625 (5/8) |
2.00 |
.69 |
1.19 |
.6250 |
-.0020 |
.34 |
16800 |
MS35813-8 |
.750 (3/4) |
2.38 |
.81 |
1.44 |
.7500 |
-.0020 |
.59 |
24300 |
MS35813-9 |
.875 (7/8) |
2.75 |
.94 |
1.29 |
.8750 |
-.0020 |
.91 |
33000 |
MS35813-10 |
1.000 |
3.00 |
1.06 |
1.94 |
1.0000 |
-.0020 |
1.32 |
43200 |
Requirements:
1. Material: Steel, carbon, SAE 1010, 1111, SAE C1015 - C1029 or equivalent in accordance with
SAE-AIR4127. These steels shall have a minimum tensile strength of 55,000 psi.
2. Protective coating: Zinc coated (hot dip galvanized) in accordance with ASTM A123/A123M, Zinc (electrodeposited) in accordance with ASTM B633.
3. Surface roughness: Surfaces marked shall have 125 surface roughness in accordance with ASME B46.1.
4. Tolerance: Unless otherwise specified, tolerance shall be ±.03.
5. Dimensions: All dimensions specified are to be met after plating. Notes:
1. Unless otherwise specified, all dimensions are in inches.
2. Remove all burrs and sharp edges.
3. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
4. Illustrations are for identification and are not intended to restrict the design or shapes not dimensioned.
5. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business