MS21106B
NOTES.
1. Clamp band - Corrosion resistant steel Type 321 in accordance with SAE AMS 5510, annealed.
Cushion - Corrosion resistant steel Type 321 or 347 in accordance with SAE AMS 5510 or SAE AMS 5512.
2. Protective Treatment: Passivate in accordance with SAE AMS 2700.
3. Remove all burrs and sharp edges.
4. Dimensions are in inches. Unless otherwise specified, tolerances decimals +.015.
5. Dimension "D" is applicable in closed position only..
6. The MS part number, including dash number, and manufacturer's identification, shall be marked on each clamp.
7. Clamps shall be furnished in the open position.
8. Method of cushion attachment to band is optional.
9. Reinforced corner is mandatory.
10. For design feature purposes, this standard takes precedence over procurement documents referenced herein.
11. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodians: Preparing activity: Army - AV DLA - IS
Navy - AS
Air Force - 99 (Project 5340-2010-012)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil
3
Source: https://assist.dla.mil -- Downloaded:
Check the source to verify that this is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business