MIL-DTL-85052/1C
Table I. Clamp dimensions - Continued. 8/
E 7/
J 5/
R
T
Y 5/
Dash
C
D 6/
Dia
+ .032
(Ref)
+ .010
(Ref)
No.
(Ref)
15
.611
.938
.929
.368
.256
.032
+ .002
16
.642
1.000
.960
17
.681
1.062
1.001
18
.712
1.125
1.032
.125
19
.744
1.188
1.064
.040
.262
.370
20
.775
1.250
1.095
+ .003
21
.806
1.312
1.126
22
.838
1.375
1.158
23
.869
1.438
1.189
24
.900
1.500
1.220
5/
See figure 1, note
See figure 1, note
6/
7/
See figure 1, note
See figure 1, note 8
8/
REQUIREMENTS:
MARKING
Band. The complete standard part number and manufacture's name, trademark, or
Contractor And Government Entity (CAGE) code shall be impression stamped on the band in an
area not covered by the cushion. All marking shall be above tube theoretical centerline
(see figure 1). Clamp bands of - 2, -3, - 4 sizes may be marked with the manufacturer's
identification, the size, and the specification sheet number according to space limitations.
Cushion. None
MATERIALS
Metal band. 17-7PH corrosion resistant steel in accordance with SAE-AMS5528 or
SAE-AMS5529, annealed, stress relieved, and heat-treated to TH1100 condition in accordance
with SAE-AMS-H-6875 after forming.
Cushion. Nitrile Butadiene rubber, 65-75 durometer, color yellow as specified in the
general specification with additional requirements specified in the specification sheet.
FINISH
Metal band. Passivate in accordance with SAE-AMS-QQ-P-35, Type II
Cushion. None
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business