A-A-55617C
5. PACKAGING.
5.1 Preservation, packing and marking shall be as specified in the contract or order.
6. NOTES.
6.1 Unless otherwise specified, all dimensions are in inches.
6.2 Unless otherwise specified in the contract or purchase order, packaging shall be in accordance with ASTM
D3951.
6.3 "Continuously" shall mean 45 minutes of rolling operation for each hour of work. The cycling of the stop and go
periods shall be at the option of the manufacturer.
6.4 Unless otherwise specified, tolerance: .xx .09, .xxx .030.
6.5 Part Identification Number (PIN). The part identification number (PIN) shall consist of the basic commercial
item description number followed by a dash number from Table I, "R" for rigid caster or "S" for swivel caster and a
code letter for wheel material. Add "B" for brake (optional) and/or "L" for swivel lock (optional) and/or "E" for
electrical conductive tread (optional for code "U" only) after PIN number.
Example: AA55617 - 6 S P B L
Swivel Lock
Brake
C (Phenolic)
Wheel code
P (Polyurethane)
U (Rubber)
M (Metal)
Swivel type caster
Dash number
Basic number
6.6 Source of documents.
6.6.1 FAR. The FAR may be obtained from the Regulatory Secretariat, 1800 F Street NW, Washington, DC
20405 or online at https://www.acqnet.gov.
6.6.2 ASTM Standards. Copies of ASTM standards may be obtained from the ASTM International, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959 or online at https://www.astm.org.
6.7 Ordering data. The contract or order should specify the following:
a. CID document number, revision, and CID PIN.
b. Product conformance provisions.
c. Packaging requirements.
6.8 Key words.
Horn Assembly
Mounting Plate
Swivel Lock
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business