A-A-462B
September 1, 1988
SUPERSEDING
A-A-462A
July 8, 1988
COMMERCIAL ITEM DESCRIPTION
HOOK AND EYE, DOOR
The General Services Administration has authorized the use of this
Commercial Item Description in lieu of Federal Specification FF-H-111C.
This commercial item description covers steel wire hooks and eyes for securing doors.
Salient characteristics:
Design. The hook and eye shall consist of a hook and eye assembly and a additional eye similar to that shown in figure 1 below. Hook lengths shall 1 to 6 inches as specified. Hook length shall be determined as shown in figure 1 below. The dimensional tolerance for hook length shall be + 1/4 inch. The eyes shall have self-tapping wood screw threads. The minimum diameter of 1 through 3 inch length hooks shall be 7/64 inch. The minimum diameter for 4 through 6 inch length hooks shall be 9/64 inch. The minimum diameter for eyes shall be 7/64 inch, regardless of hook length.
Finish. The hook and eyes shall have either a bright steel finish or zinc coating in accordance with ANSI/BHMA A156.18 finish code 603 or 604 as specified.
Workmanship. the hooks and eyes shall have a smooth surface and be free of defects affecting serviceability or appearance.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business