March 3, 1993
TO SUPERSEDE
A-A-226
April 23, 1981
COMMERCIAL ITEM DESCRIPTION
HINGE, BUTT (TRANSOM)
The General Services Administration has authorized the use of this commercial item description.
1. SCOPE
1.1 Scope. This commercial item description item description covers commercial industrial quality, transom hinges with non-removable pins.
1.2 Measurement system. The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are for informational purposes only.
1.3 Classification. The hinges shall be furnished in sizes 2, 3-1/2, and 4 inches as specified (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 The documents referenced in this commercial item description shall be the issues in effect on the date of the invitation for bids or request for proposal unless otherwise specified. These documents form a part of this commercial item description to the extent specified. In the event of a conflict between this commercial item description and a document referenced herein, this commercial item description shall take precedence.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: General Services Administration, Engineering Group (7FXEE), 819 Taylor Street, Fort Worth, TX 76102. |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business