[INCH-POUND]
A-A-1927D
July 27, 1993
SUPERSEDING
A-A-1927C
May 30, 1989
MIL-P-17802E
November 18, 1987
COMMERCIAL ITEM DESCRIPTION
PADLOCK
The General Services Administration has authorized the use of this commercial item description in preference to Military Specification MIL-P-17802.
1. ABSTRACT
1.1 Abstract. This description covers key operated, dead bolt padlocks intended for low security use.
2. CLASSIFICATION
2.1 Type and size. The padlocks shall be classified as follows:
Type I – Hardened steel shackle with a case of CRS, carbon steel, or alloy steel in accordance with MS35647 and as specified herein. (see notes).
Type II – Hardened steel shackle and brass or bronze case in accordance with MS35647 and as specified herein.
Type III – Brass or bronze shackle and case in accordance with MS21313 and as specified herein.
Size – Shall be according to case width as specified and in accordance with MS21313 or MS35647 as indicated below:
Size A – 1-1/2 inch (38.1 mm) + 1/16 inch (1.588 mm).
Size B – 1-3/4 inch (44.45 mm) + 1/16 inch (1588mm).
Size C – 2-3/4 inch (69.85 mm) + 1/16 inch (1.588 mm).
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to. Commanding Officer (Code 156), Naval Construction Battalion Center, 621 Pleasant Valley Road, Port Hueneme, CA 93043-4300. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business