AN100039 REV.3
Notes:
1.
Material: Magnesium SAE-AMS 4424, SAE-AMS 4434 or SAE-AMS 4484.
2.
Parting lines of casting are to be commercially clean.
3.
Surface roughness: SAE-AS291 unspecified surfaces as cast.
4.
Machined parts subject to fluorescent penetrant inspection per ASTM E1417.
5.
Finish: Unless otherwise specified, SAE-AMS 2510, except primer shall be MIL-PRF-23377.
6.
Casting identification: SAE-AMS 2804.
7.
Break sharp edges .003/.015 unless otherwise specified.
8.
Dimensions in inches. Unless otherwise specified: Tolerances; linear dimensions ±.010.
9.
Covers suitable for flight, shipment and storage.
10.
Changes from previous issue. Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing activity:
Army - AV
DLA IS
Navy AS
Air Force 99
(Project 5340-2009-016)
Review activity:
Air Force - 71
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the currency of
the information above using the ASSIST Online database at https://assist.daps.dla.mil/
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business